Murco M100 Drywall Joint Compound
Starting at: $6.00
-
- 25-35 POUND BAG. Mixes 1:1 with water.
- Full bag mixed 1:1 with water creates approximately 4 gallons of mud material. Depending on how thick the mud is applied determines coverage.
- However, these bags have been OVERFILLED recently and may create up to ~5.5 gallons of material.
- This product can be thinned or thickened as needed for your specific application.
- Small amounts of this product mixed with water can be used for simple hole patching or similar applications.
- Dries to the touch in 30-60 minutes.
- Our suggestion is to mix in small amounts with ample agitation. Once the material is properly blended, blend more, allow to sit for 5 minutes before using so that the water may fully absorb into the dry material.
- In very small quantities it can be mixed with a whisk to create a spackle. Mix till saturated
- For larger applications such as dry wall mud, we recommend using a drill mixer. Mix till saturated.
PRODUCT IS DUSTY.
While we double bag and insulate this product within the box, contents can become dusty through shipping/handling.
Please be advised when receiving/opening.
Murco M100 Drywall Joint Compound
Murco M100 Drywall Joint Compound creates immaculate designs and patterns catering to high quality standards. M100 is recommended for use to create an eco-friendly, toxin free environment. The powdered all-purpose, joint compound is formulated with no preservatives, mildewcides or fungicides, ensuring air quality and environmental safety, and contains no Volatile Organic Compound (VOC). M100 joint compound is made with inert fillers and natural binders only. It contains no slow-releasing compounds, and mixes easily with tap water.
M100 Drywall Joint Compound
Murco’s hypo-allergenic compound is scientifically developed to create a superior finish that does not crack, shrink, or discolor even when used in the most extreme conditions. Its durability, easy application and ability to perfectly conceal surface flaws and dents make it the preferred choice to achieve the professional look you desire. Murco’s line of hypo allergenic products meet or exceeds industry standards (ASTM standard C-475 and Federal specification SS-J-5709) and are specifically designed for the chemically-sensitive consumer.
Our suggestion is to mix Murco M100 in small amounts with ample agitation. Once the material is properly blended, blend more, allow to sit for 5 minutes before using so that the water may fully absorb into the dry material.
-
- In very small quantities it can be mixed with a whisk to create a spackle. Mix till saturated.
- For larger applications such as dry wall mud, we recommend using a drill mixer. Mix till saturated.
SPEC SHEET
Spec Sheet
SPEC SHEET
Questions & Answers
-
Any idea when this will be back in stock?!
-
Q Any idea when this will be back in stock?!Asked by on February 23, 2023 7:28 PMAnswered by the admin
Hello! Thanks for reaching out. We very recently got an update (2/24/23) that we should have inbound product soon. Hoping within the first week of March. As soon as it's received it will be marked back in inventory. Thanks!
Can it be used as spackling?
-
Q Can it be used as spackling?Asked by on February 19, 2021 9:51 AMAnswered by the admin Basically, yes. Just mix with water to the desired consistency!
Related products
